﻿ Modeling and Development of Three-Layer Sandwich Composite Materials with Honeycomb Core | Herald of the Bauman Moscow State Technical University. Natural Sciences
|

# Modeling and Development of Three-Layer Sandwich Composite Materials with Honeycomb Core

 Authors: Dimitrienko Yu.I., Fedonyuk N.N., Gubareva E.A., Sborschikov S.V., Prozorovskiy A.A., Erasov V.S., Yakovlev N.O. Published: 04.10.2014 Published in issue: #5(56)/2014 DOI: Category: Applied Mathematics and Methods of Mathematical Simulation Keywords: sandwich honeycomb composite material, asymptotic homogenization method, multi-level structure, computer modeling, finite element method, physical and mechanical properties, four-point bending, infusion technology

Mathematical model of multi-level structure of three-layer sandwich material with honeycomb core based on woven composite are developed. This model allows calculating the effective elastic and the strength characteristics of the material. Model is based on the use of asymptotic homogenization method of hierarchical periodic structures. Samples of numerical finite element computations of honeycomb structures are presented. The manufacture technology of sandwich honeycomb composite material based on glass-fiber clothes, modified vinil-aether binder and glass-fiber-reinforced honeycomb is developed using infusion method. The detailed computer simulation of stress-strain state for panel made of three-layer honeycomb material at four-point bending was performed. It allowed revealing destruction features of such type of constructions due to local shear stresses within working area of power load.

## References

[1] Fleck N.A., Deshpande V.S. The resistance of clamped sandwich beams to shock loading. J. Appl. Mech., 2004, vol. 71, pp. 386-401.

[2] Xue Z., Hutchinson J.W. Preliminary assessment of sandwich plates subject to blast loads. Int. J. Mech. Sci., 2003, vol. 45, pp. 687-705.

[3] Kobelev V.N. (ed.), Kovarskij L.M., Timofeev S.I. Raschet trehslojnyh konstrukcij: Spravochnik [Calculation of sandwich structures: A Handbook]. Moscow, Mashinostronie Publ., 1984. 304 p.

[4] Aleksandrov A.Ja., Borodin M.Ja., Pavlov V.V. Konstrukcii s zapolniteljami iz penoplastov [Design with fillers from foams]. Moscow, Mashinostronie Publ., 1972. 212 p.

[5] Dimitrienko Yu.I., Sokolov A.P. Multiscale modeling of elastic composite materials. Mat. Model. [Math. Models Comput. Simul.], 2012, vol. 24, no. 5, pp. 3-20 (in Russ.).

[6] Dimitrienko Yu.I., Kashkarov A.I. The calculation of the effective characteristics of composite materials with periodic structure by finite element method]. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Estestv. Nauki [Herald of the Bauman Moscow State Tech. Univ., Nat. Sci.], 2013, no. 2, pp. 95-108 (in Russ.).

[7] Dimitrienko Yu.I., Sokolov A.P. Automated forecasting of composite material properties by means of homogenization method]. Informacionnye tehnologii [Information Technologies], 2008, no. 8, pp. 31-38 (in Russ).

[8] Dimitrienko Yu.I., Sborshhikov S.V., Sokolov A.P., Sadovnichij D.N., Gafarov B.R. Computer and experimental study modeling of failure of micro-sphere filled composite. Kompozity i nanostruktury [Composites and nanostructures], 2013, no. 3, pp. 35-51 (in Russ).

[9] Dimitrienko Yu.I., Sborshhikov S.V., Sokolov A.P. Computational modeling of microdestruction and strength of multidimensional reinforced composites. Mehanika kompozicionnyh materialov i konstrukcij [Composite mechanics and design], 2013, vol. 19, no. 3. pp. 365-383 (in Russ).

[10] Dimitrienko Yu.I., Sborshhikov S.V., Sokolov A.P., Shpakova Yu.V. Computational modeling of processes of destruction of textile composites. Vychislitel’naja mehanika sploshnoj sredy [Computational Continuum Mechanics], 2013, vol. 6, no. 4, pp. 389402 (in Russ). DOI: 10.7242/1999-6691/2013.6.4.43

[11] Dimitrienko Yu.I. Tenzornyy analiz. Mekhanika sploshnoy sredy. V 4 t. [Tensorial analysis. Continuum mechanics. In 4 volumes]. Moscow, MGTU im. N.E. Baumana Publ., 2011. 463 p. (Vol. 1).

[12] Dimitrienko Yu.I. Mehanika kompozicionnyh materialov pri vysokih temperaturah [Mechanics of composite materials at high temperatures]. Moscow, Mashinostronie Publ., 1997. 366 p.

[13] Dimitrienko Yu.I. Osnovy mehaniki tverdogo tela. Mehanika sploshnoj sredy. T. 4 [Fundamentals of solid mechanics. Continuum Mechanics]. Moscow, MGTU im. N.E. Baumana Publ., vol. 4, 2013. 624 p.

[14] Dimitrienko Yu.I. A structural thermo-mechanical model of textile composite materials at high temperatures. Composites Science and Technology, 1999, vol. 59, no. 7, pp. 1041-1053.