|

Default Sensor Network Setup based on the Anisotropic Criterion

Authors: Yurchenkov A.V. Published: 05.03.2023
Published in issue: #1(106)/2023  
DOI: 10.18698/1812-3368-2023-1-45-63

 
Category: Mathematics and Mechanics | Chapter: Differential Equations and Mathematical Physics  
Keywords: anisotropic theory, anisotropic norm, sensor networks, sensor failures, non-stationary systems, suboptimal estimation

Abstract

The paper considers the problem of setting up a communication scheme associated with the adjacency matrix between separate non-ideal sensors and known probability of their failsafe operation. As the evaluation object, a linear discrete non-stationary model in the state space was chosen, which was affected by external perturbations with the inaccurately specified stochastic characteristics. For external perturbations, upper limit of the anisotropy of the extended vector consisting of all the perturbing sequence elements was determined. Sensors were combined into a common network, where each separate node was able to use not only the own measurements to build an estimate of the desired output, but also the measurements received from the adjacent sensors. The model took into account the failure of specific sensors, where failures had the Bernoulli distribution. A failure should be understood as the random readings of a measurement device containing no useful information. The criterion is anisotropic norm of the system in the estimation errors from the perturbing action to the estimated output error. The problem was in selecting such adjacency matrix coefficients, where the anisotropic norm value in the estimation errors was not exceeding a certain threshold value. Solution to the problem was reduced to a numerical procedure of solving a special system of matrix inequalities ensuring boundedness of the system anisotropic norm in the estimation errors

Please cite this article in English as:

Yurchenkov A.V. Default sensor network setup based on the anisotropic criterion. Herald of the Bauman Moscow State Technical University, Series Natural Sciences, 2023, no. 1 (106), pp. 45--63 (in Russ.). DOI: https://doi.org/10.18698/1812-3368-2023-1-45-63

References

[1] Whitehouse K., Culler D. Calibration as parameter estimation in sensor networks. WSNA’02, 2002, pp. 59--67. DOI: https://doi.org/10.1145/570738.570747

[2] Wahba S.K., Dandamudi S., Dalton A.R., et al. NePTune: optimizing sensor networks. Proc. 17th Int. Conf. on Comp. Comm. and Networks, 2008. DOI: https://doi.org/10.1109/ICCCN.2008.ECP.82

[3] Corsini P., Masci P., Vecchio A. Configuration and tuning of sensor network applications through virtual sensors. IEEE PERCOMW’06, 2006, pp. 5--32. DOI: https://doi.org/10.1109/PERCOMW.2006.32

[4] Becnel T., Sayahi T., Kelly K., et al. A recursive approach to partially blind calibration of a pollution sensor network. IEEE ICESS, 2019. DOI: https://doi.org/10.1109/ICESS.2019.8782523

[5] Cui J., Liu Y., Wei K., et al. Research on clock source correction method based on wireless sensor network and TPSN network protocol. J. Phys.: Conf. Ser., 2020, vol. 1449, art. 012047. DOI: http://dx.doi.org/10.1088/1742-6596/1449/1/012047

[6] Stankovic M.S., Stankovic S.S., Johansson K.H., et al. On consensus-based distributed blind calibration of sensor networks. Sensors, 2018, vol. 18, iss. 11, art. 4027. DOI: https://doi.org/10.3390/s18114027

[7] Stankovic M.S., Stankovic S.S., Johansson K.H. Asynchronous distributed blind calibration of sensor networks under noisy measurements. IEEE Trans. Control. Netw. Syst., 2018, vol. 5, iss. 1, pp. 571--582. DOI: https://doi.org/10.1109/TCNS.2016.2633788

[8] Delaine F., Lebental B., Rivano H. In situ calibration algorithms for environmental sensor networks: a review. IEEE Sens. J., 2019, vol. 19, iss. 15, pp. 5968--5978. DOI: https://doi.org/10.1109/JSEN.2019.2910317

[9] Semyonov A.V., Vladimirov I.G., Kurdyukov A.P. Stochastic approach to H-optimization. IEEE CDC, 1994, pp. 2249--2250. DOI: https://doi.org/10.1109/CDC.1994.411485

[10] Vladimirov I.G., Kurdyukov A.P., Semenov A.V. Anisotropy of signals and entropy of linear time-independent systems. Doklady Akademii nauk, 1995, vol. 342, no. 5, pp. 583--585 (in Russ.).

[11] Vladimirov I.G., Daymond F., Kloeden P.E. Anisotropy-based robust performance analysis of finite horizon linear discrete time varying systems. Autom. Remote Control., 2006, vol. 67, no. 8, pp. 1265--1282. DOI: https://doi.org/10.1134/S0005117906080066

[12] Vladimirov I.G., Kurdjukov A.P., Semyonov A.V. On computing the anisotropic norm of linear discrete-time-invariant systems. IFAC Proceedings Volumes, 1996, vol. 96, iss. 1, pp. 3057--3062. DOI: https://doi.org/10.1016/S1474-6670(17)58144-6

[13] Kustov A.Yu. State-space formulas for anisotropic norm of linear discrete time varying stochastic system. CCE, 2018. DOI: https://doi.org/10.1109/ICEEE.2018.8533987

[14] Yurchenkov A.V., Kustov A.Yu., Kurdyukov A.P. Anisotropy-based bounded real lemma for discrete-time systems with multiplicative noise. Dokl. Math., 2016, vol. 93, no. 2, pp. 238--240. DOI: https://doi.org/10.1134/S1064562416020204

[15] Yurchenkov A.V. Anisotropy-based controller design for linear discrete-time systems with multiplicative noise. J. Comput. Syst. Sci. Int., 2018, vol. 57, no. 6, pp. 864--873. DOI: https://doi.org/10.1134/S1064230718060138

[16] Belov I.R., Yurchenkov A.V., Kustov A.Yu. Anisotropy-based bounded real lemma for multiplicative noise systems: the finite horizon case. MED, 2019, pp. 148--152. DOI: https://doi.org/10.1109/MED.2019.8798565

[17] Kustov A.Yu., Yurchenkov A.V. Finite-horizon anisotropic estimator design in sensor networks. IEEE CDC, 2020, pp. 4330--4335. DOI: https://doi.org/10.1109/CDC42340.2020.9304239

[18] Kustov A.Yu., Yurchenkov A.V. [Anisotropy-based filtration problem for time-varying system with packet dropouts]. Mater. 15-y Mezhdunar. konf. "Ustoychivost i kolebaniya nelineynykh sistem upravleniya" [Proc. 15th Int. Conf. Stability and Oscillations of Nonlinear Control Systems]. Moscow, Trapeznikov IСS RAS Publ., 2020, pp. 256--259 (in Russ.).

[19] Kustov A., Yurchenkov A. Finite-horizon anisotropy-based estimation with packet dropouts. IFAC--Papers OnLine, 2020, vol. 53, iss. 2, pp. 4516--4520. DOI: https://doi.org/10.1016/j.ifacol.2020.12.468

[20] Timin V.N., Tchaykovsky M.M., Kurdyukov A.P. A solution to anisotropic suboptimal filtering problem by convex optimization. Dokl. Math., 2012, vol. 85, no. 3, pp. 443--445. DOI: https://doi.org/10.1134/S1064562412030362

[21] Timin V.N., Kurdyukov A.P. Anisotropy-based multicriteria time-varying filtering on finite horizon. Dokl. Math., 2015, vol. 92, no. 2, pp. 638--642. DOI: https://doi.org/10.1134/S1064562415050142

[22] Vladimirov I.G., Diamond P., Kloeden P. Anisotropy-based robust performance analysis of linear discrete time varying systems. CADSMAP Research Report 01-01. The University of Queensland, 2001.

[23] Yurchenkov A.V., Kustov A.Yu. Sensor network adjusting based on anisotropic criterion. ICSC, 2021, pp. 268--273. DOI: https://doi.org/10.1109/ICSC50472.2021.9666624

[24] Shen B., Wang Z., Hung Y.S. Distributed H-consensus filtering in sensor networks with multiple missing measurements: the finite horizon case. Automatica, 2010, vol. 46, iss. 10, pp. 1682--1688. DOI: https://doi.org/10.1016/j.automatica.2010.06.025

[25] Zhang R., Xue A., Gao F. Model predictive control. Approaches based on the extended state space model and extended non-minimal state space model. Singapore, Springer, 2019. DOI: https://doi.org/10.1007/978-981-13-0083-7